Ferrer Aviation Services is an FAA Certificated Repair Station (F91R602X) and is authorized to perform the following services:

• Airframe

Installation and maintenance of radio, electrical and instrument systems in aircraft, including weight and balance reports.

Return to service aircraft that have been maintained or altered in accordance with previously approved data or other data approved by the Administrator.

• Altimeters, Encoders and Static Systems

  Installation test and certification of altimeter systems, static pressure systems and altitude reporting equipment required by Title 14 CFR, Section 91.411 and performed in accordance with14 CFR Part 43, Appendix "E", Manufacturer's instructions or other FAA approved data.

• Transponders

  Installation test and certification of encoding altimeter/ATC transponder systems required by Title 14 CFR, section 91.413 to include TSO-C112 (Mode A, C and S) and performed in accordance with current 14 CFR Part 43, Appendix "F", manufacturer's instructions or other FAA approved data.

  Transponder Alignment and Repairs

• Weight and Balance

Aircraft weighing (up to 4500 lbs), CG calculations, records update.

---

In addition to those services provided as a certificated repair station (listed above), we also have the test equipment and personnel (A&P IA) to provide the following services:

• TCAS

  Installation, maintenance, and testing of Mode S transponders and TCAS avionics equipment.

• Dynamic Prop Balancing

Computerized vibration analysis and correction.

• Annual Inspections

Owner-assisted annual inspections.

---