|
|
|
|
We
specialize in the repair of older, panel-mount transponders, such
as the KING KT-76/78, Narco AT-50/150 series, Collins TR-661 series
and others. Many shops refuse to work on them and would rather you
buy a new transponder. It has been our experience that many older
transponders can be brought back to life with a simple realignment
to factory settings.
If
you are not sure your transponder is working correctly, we offer a
flat-rate service that won't break the bank.
-
For
$49 plus shipping, we will bench test your transponder and
advise you of its condition.
-
For
$99 plus shipping, we will bench test your transponder and
realign it to manufacturer's specifications, providing there is
nothing else wrong.
-
Encoder
problems? We can test your encoder while evaluating your transponder
for an additional $30.
-
If
your transponder requires parts or repairs, we will advise you of
the cost and you can decide whether or not to have it repaired.
Before
you send your transponder off to any repair facility, make sure
they are an FAA-certified Repair Station using calibrated test equipment.
We issue FAA 8130-3 airworthiness certificates with all repairs and
certifications.
We
also buy non-working transponders. Please contact us and let us make
an offer.
PLEASE
NOTE: Call 817-422-2714 before sending us your transponder.
We are a small shop (which means low overhead and low cost for
you) but we do, occasionally, take vacations.
|